+86-576-87282706 zhengying@zjzyyy.com
Huandong Industrial Park, Zhuguang, Yuhuan, Zhejiang, China. P.C.317600

Name: Hydraulic Power Pack for Fork lift

The hydraulic power unit is composed of a gear oil pump,a DC motor,an integrated valve block,a hydraulic valve and an oil tank and other components.Start motor,to achieve the rise,open the electromagnetic unloading valve, to achieve a decline in speed by adjustable throttle control.This series of products are the ideal power source for a variety of high lift trucks, small lifting platforms and other equipment.

1.This power which can only work intermittently and repeatedly ,ie.,1minute on and 8 minute off .

2.Clean all the hydraulic parts concerned before mounting the power unit .

3.Viscosity of the hydeaulic oil shoud be 15~68cst,which should also be clean and free of impurities.ISO46 hydraulic oil is recommend.

4.This hydranlic power unit is suitable for horizontal installation.

5.Check the oil level in the tank after the initial running of the power unit .

6.Oil changing is required after the initial 100operation hours,afterwards once every 3000 hours.

7.wei are at your disposal to offer you the power units with your favorate power ,flow,pressure as well as the tank capacity.

Schematic diagram of oil circuit:

Product Drawing
 
Online Service
Hotline
 +86-576-87282706

Sweep Access