+86-576-87282706 zhengying@zjzyyy.com
Huandong Industrial Park, Zhuguang, Yuhuan, Zhejiang, China. P.C.317600

Name: Hydraulic Power Pack for Fork lift

The hydraulic power unit for forklift trucks,consists of a gear pump, DC motor,integrated valve block,a variety of hydraulic valve and fuel tank and other components;unloading for manual unloading,the handle has a control switch to control the rising and falling down;speed is controlled by the internal quantitative compensation valve.

1.This power which can only work intermittentlyand repeatedly ,ie.,1minute on and 8 minute off .

2.Clean all the hydraulic parts concerned before mounting the power unit .

3.Viscosity of the hydeaulic oil shoud be 15~68cst,which should also be clean and free of impurities.ISO46 hydraulic oil is recommend.

4.This hydranlic power unit is suitable for horizontal installation.

5.Check the oil level in the tank after the initial running of the power unit .

6.Oil changing is required after the initial 100operation hours,afterwards once every 3000 hours.

7.wei are at your disposal to offer you the power units with your favorate power ,flow,pressure as well as the tank capacity.

Schematic diagram of oil circuit:


Product Drawing
Online Service

Sweep Access